MSD Series Three-Phase Aluminum-Cased Induction Motor
MSD Series Three-Phase Aluminum-Cased Induction Motor

Italy MSD Series Three-Phase Aluminum-Cased Induction Motor

The MSD series three-phase dual-speed induction motors were developed based on the MS series motors. They offer a variety of speed options, including 2/4, 4/8, 2/6, 2/8, 4/6, and 6/8 RPM.

Category:

ItalyAluminum casing

86-593-6370866

Inquire

Product Description

Introduction

The MSD series three-phase dual-speed induction motors were developed based on the MS series motors. They are available in a variety of speeds, including 2/4, 4/8, 2/6, 2/8, 4/6, and 6/8 RPM.

Motor characteristics

● Altitude not exceeding 1000m

● Ambient temperature: -15°C < 9 < 14°C

● S1 Continuous Operation Mode

● Class F, Class B insulation

● Protection rating: IP55, others

● Various installation methods such as B3, B5, B14, and more

● IC0141 Air-Cooling Method

● Optional voltage and frequency

Installation dimensions

Frame Foot Mounting Shaft General
H A B C K D E F G SS XX ZZ AA AD HD AC L LCCT ☆ KK TBS TBW To be honest
56 56 90 71 36 5.8 × 8.8 ø9 20 3 7.2 M3 9 12 110 156 100 Ø117 196 232 1-M16×1.5 14 88 88
63 63 100 80 40 7 × 10 ø11 23 4 8.5 M4 10 14 120 171 108 Ø130 220 258 1-M16×1.5 14 94 94
71☆☆ 71 112 90 45 7 × 10 Ø14 30 5 11 M5 12 17 132 186 115 Ø147 241(255) 282 (296) 1-M20×1.5 20 94 94
80 80 125 100 50 10 × 13 Ø19 40 6 15.5 M6 16 21 160 213 133 Ø163 290 339 1-M20×1.5 27 105 105
90S 90 140 100 56 10 × 13 Ø24 50 8 20 M8 19 25 175 229 139 Ø183 312 361 1-M20×1.5 30 105 105
90L1/L2 90 140 125 56 10 × 13 Ø24 50 8 20 M8 19 25 175 229 139 Ø183 337/367 386/416 1-M20×1.5 30 105 105
100☆☆ 100 160 140 63 12 × 15 ø28 60 8 24 M10 22 30 198 252 152 Ø205 369 (387) 425 (443) 2-M20×1.5 26 105 105
112 112 190 140 70 12 × 15 ø28 60 8 24 M10 22 30 220 279 167 Ø229 395 463 2-M25×1.5 32 112 112
132S 132 216 140 89 12 × 15 ø38 80 10 33 M12 28 37 252 318 186 Ø265 437 497 2-M25×1.5 38 112 112
132M/L 132 216 178 89 12 × 15 ø38 80 10 33 M12 28 37 252 318 183 Ø265 475/507 535/561 2-M25×1.5 38 112 112
160M/L 160 254 210/254 108 15 × 19 ø42 110 12 37 M16 36 45 290 384 224 ø325 640 697 2-M32×1.5 64 143 143

 

Frame B5 B5R B14 B14B
M N P T S R M N P T S R N M P T S R N M P T S R
56 Ø100 ø80 Ø120 3.0 ø7 0             ø50 ø65 ø80 2.5 M5 0            
63 Ø115 ø95 Ø140 3.0 Ø10 0             ø60 Ø75 ø90 2.5 M5 0 ø80 Ø100 Ø120 3.0 M6 0
71☆☆ Ø130 ø110 ø160 3.5 Ø10 0 Ø115 ø95 Ø140 3.5 Ø10 0 70 ø85 Ø105 2.5 M6 0 ø95 Ø115 Ø140 3.0 M8 0
80 Ø165 Ø130 Ø200 3.5 Ø12 0 Ø130 ø110 ø160 3.5 Ø10 0 80 Ø100 Ø120 3.0 M6 0 110 Ø130 ø160 3.5 M8 0
90S Ø165 Ø130 Ø200 3.5 Ø12 0 Ø130 ø110 ø160 3.5 Ø10 0 ø95 Ø115 Ø140 3.0 M8 0 110 Ø130 ø160 3.5 M8 0
90L1/L2 Ø165 Ø130 Ø200 3.5 Ø12 0 Ø130 ø110 ø160 3.5 Ø10 0 ø95 Ø115 Ø140 3.0 M8 0 ø110 Ø130 ø160 3.5 M8 0
100☆☆ ø215 ø180 Ø250 4.0 Ø15 0 Ø165 Ø130 Ø200 4.0 Ø12 0 ø110 Ø130 ø160 3.5 M8 0 Ø130 Ø165 Ø200 3.5 M10 0
112 ø215 ø180 Ø250 4.0 Ø15 0 Ø165 Ø130 Ø200 4.0 Ø12 0 ø110 Ø130 ø160 3.5 M8 0 Ø130 Ø165 Ø200 3.5 M10 0
132S Ø265 ø230 Ø300 4.0 Ø15 0 ø215 ø180 Ø250 4.0 Ø15 0 130 Ø165 Ø200 4.0 M10 0 180 ø215 Ø250 4.0 M12 0
132M/L Ø265 ø230 Ø300 4.0 Ø15 0 ø215 ø180 Ø250 4.0 Ø15 0 130 Ø165 Ø200 4.0 M10 0 ø180 ø215 Ø250 4.0 M12 0
160M/L Ø300 Ø250 ø350 5.0 Ø19 0             180 ø215 Ø250 4.0 M12 0            

☆☆: This base model corresponds to two housing sizes. The rated output power is suitable for the standard "L"-shaped size, while increased output power is recommended for the larger "L"-shaped version (see the illustration in parentheses "()" for details).

Technical Specifications

400V/50Hz

Model Power
kW 		Speed
RPM 		Efficiency
7%		 Power Factor
COS Φ 		Current
A 		Rated Torque
Nm 		Tst/Tn
Times 		lst/ln
Times 		Tmax/Tn
Times
2P 4P 2P 4P 2P 4P 2P 4P 2P 4P 2P 4P 2P 4P 2P 4P 2P 4P
MSD711-2/4 0.3 0.22 2750 1350 60 55 0.8 0.73 0.90 0.79 1.04 1.56 1.7 1.7 3.5 3.5 1.9 1.9
MSD712-2/4 0.45 0.3 2790 1380 63 58 0.8 0.73 1.29 1.02 1.54 2.08 2 2 4 4 2 2
MSD801-2/4 0.55 0.45 2800 1380 65 64 0.84 0.75 1.45 1.35 1.88 3.11 2 2 4.5 4.5 2.1 2.1
MSD802-2/4 0.75 0.6 2800 1400 67 68 0.86 0.77 1.88 1.65 2.56 4.09 1.8 1.8 4.5 4.5 2 2
MSD90S-2/4 1.25 0.95 2820 1400 72 68 0.86 0.82 2.91 2.46 4.23 6.48 2 2 5 5 2 2
MSD90L-2/4 1.7 1.32 2830 1400 73 70 0.86 0.83 3.91 3.28 5.74 9.00 2 2 5 5 2 2
MSD100L1-2/4 2.4 1.84 2830 1410 73 76 0.86 0.83 5.52 4.21 8.10 12.46 2 2 5.5 5 2 2
MSD100L2-2/4 3.3 2.6 2840 1420 74 78 0.86 0.85 7.48 5.66 11.10 17.19 2 1.9 5.5 5 2 1.9
MSD112M-2/4 4.5 4 2860 1430 77 79 0.85 0.86 9.92 8.50 15.03 26.71 2 1.8 5.5 5 2.2 2
MSD132S-2/4 6 5 2860 1440 79 82 0.84 0.86 13.05 10.23 20.03 33.16 2 1.5 5.5 5.5 2.2 1.9
MSD132M-2/4 8 6.6 2870 1440 82 84 0.84 0.86 16.76 13.09 26.62 43.77 2 2 6 6 2.2 2.2
MSD160M-2/4 11 9 2920 1450 84 84 0.85 0.82 22.23 18.86 35.98 59.28 1.8 1.8 7 6 2 2
MSD160L-2/4 15 12 2920 1450 86 84 0.87 0.83 28.94 24.84 49.06 79.03 2 2 7 7 2.2 2.2

 

Model Power
kW 		Speed
RPM 		Efficiency
7%		 Power Factor
COS Φ 		Current
A 		Rated Torque
Nm 		Tst/Tn
Times 		lst/ln
Times 		Tmax/Tn
Times
4P 8P 4P 8P 4P 8P 4P 8P 4P 8P 4P 8P 4P 8P 4P 8P 4P 8P
MSD801-4/8 0.25 0.15 1380 680 58 40 0.77 0.60 0.81 0.90 1.73 2.11 2 2 4.5 3 2 2
MSD802-4/8 0.45 0.25 1390 685 68 48 0.80 0.60 1.19 1.25 3.09 3.49 1.8 2 4.5 3 2 2
MSD90S-4/8 0.55 0.3 1400 690 68 50 0.83 0.61 1.41 1.42 3.75 4.15 1.8 2 4.5 3.5 2 2
MSD90L-4/8 0.8 0.45 1400 690 68 53 0.83 0.63 2.05 1.95 5.46 6.23 1.8 1.6 4 3 1.9 1.8
MSD100L1-4/8 1.25 0.6 1400 700 69 54 0.82 0.56 3.19 2.86 8.53 8.16 1.8 2 5 3.5 2 2
MSD100L2-4/8 1.76 0.88 1400 700 71 58 0.84 0.56 4.26 3.91 12.00 12.00 1.8 2 5.5 4 2 2
MSD112M-4/8 2.2 1.5 1420 700 75 64 0.82 0.61 5.16 5.54 14.80 20.46 2 2 6 4 2 2
MSD132S-4/8 3.3 2.2 1430 705 78 70 0.84 0.64 7.27 7.09 22.04 29.8 2 2 6 5 2 2
MSD132M-4/8 4.5 3 1430 705 82 77 0.85 0.65 9.32 8.65 30.05 40.64 2 2 6 5 2 2
MSD160M1-4/8 5.5 4 1440 710 82 77 0.81 0.69 11.95 10.87 36.48 53.80 2.1 1.7 7.6 4.6 2.3 2.2
MSD160M2-4/8 7.5 5 1440 710 82 79 0.89 0.78 14.83 11.71 49.74 67.25 1.7 1.6 6.6 4.5 2.3 2.1
MSD160L-4/8 10 7 1450 715 84 82 0.90 0.78 19.09 15.80 65.86 93.50 1.8 1.9 5.5 5 2.3 2.1

 

Model Power
kW 		Speed
RPM 		Efficiency
7%		 Power Factor
COS Φ 		Current
A 		Rated Torque
Nm 		Tst/Tn
Times 		lst/ln
Times 		Tmax/Tn
Times
4P 6P 4P 6P 4P 6P 4P 6P 4P 6P 4P 6P 4P 6P 4P 6P 4P 6P
MSD801-4/6 0.3 0.22 1400 910 60 55 0.74 0.69 0.98 0.84 2.05 2.31 2 1.8 4.5 4 2 2
MSD802-4/6 0.45 0.3 1410 920 63 58 0.75 0.7 1.37 1.07 3.05 3.11 2 1.8 4.5 4 2 2
MSD90S-4/6 0.66 0.45 1410 920 66 61 0.76 0.65 1.9 1.64 4.47 4.67 1.7 1.7 5 4.5 2 2
MSD90L-4/6 0.88 0.6 1420 930 70 64 0.77 0.67 2.36 2.02 5.92 6.16 1.7 1.7 5 4.5 2 2
MSD100L1-4/6 1.32 0.88 1420 940 72 67 0.85 0.75 3.11 2.3 8.88 8.94 1.8 1.8 6 5 2 2
MSD100L2-4/6 1.76 1.2 1430 950 74 70 0.85 0.75 4.04 3.3 11.75 12.06 1.8 1.8 6 5 2 2
MSD112M-4/6 2.2 1.5 1430 950 76 70 0.8 0.70 5.22 4.42 14.69 15 2 1.8 6 5 2.2 2.2
MSD132S-4/6 3.3 2.2 1440 960 82 78 0.81 0.72 7.17 5.65 21.9 21.9 2 2 7 6 2.2 2.2
MSD132M-4/6 4.5 3 1450 970 83 80 0.82 0.74 9.54 7.31 29.6 29.5 2 2 7 6 2.3 2.3
MSD160M-4/6 6.6 4.5 1460 970 84 81 0.84 0.78 13.5 10.3 43.2 44.3 1.8 1.8 7 6 2.3 2.3
MSD160L-4/6 8.8 6 1460 970 84 81 0.85 0.79 17.8 13.5 57.6 59.1 1.8 1.8 7 6 2.3 2.3

 

Model Power
kW 		Speed
RPM 		Efficiency
7%		 Power Factor
COS Φ 		Current
A 		Rated Torque
Nm 		Tst/Tn
Times 		lst/ln
Times 		Tmax/Tn
Times
6P 8P 6P 8P 6P 8P 6P 8P 6P 8P 6P 8P 6P 8P 6P 8P 6P 8P
MSD801-6/8 0.18 0.11 900 680 50 42 0.69 0.65 0.75 0.58 1.91 1.54 1.5 1.5 3.5 3 1.5 1.5
MSD802-6/8 0.25 0.18 920 700 54 46 0.7 0.66 0.95 0.86 2.60 2.46 1.7 1.5 3.5 3 1.5 1.7
MSD90S-6/8 0.37 0.25 930 680 58 50 0.72 0.68 1.28 1.06 3.80 3.51 1.5 1.4 4 3 1.8 1.7
MSD90L-6/8 0.55 0.37 940 685 63 54 0.73 0.69 1.73 1.43 5.59 5.16 1.5 1.4 4 3 1.8 1.7
MSD100L1-6/8 0.75 0.55 950 700 69 63 0.74 0.74 2.12 1.70 7.54 7.50 1.5 1.4 5 4 2 1.8
MSD100L2-6/8 1.03 0.75 955 705 71 65 0.76 0.76 2.76 2.19 10.30 10.16 1.5 1.4 5 4 2 1.8
MSD112M-6/8 1.25 0.95 960 710 72 64 0.71 0.71 3.53 3.02 12.43 12.78 1.5 1.5 5 4 2 1.8
MSD132S-6/8 2.2 1.5 970 720 76 70 0.71 0.7 5.88 4.42 21.66 19.90 1.6 1.4 6 5.5 2.3 2
MSD132M-6/8 3 1.85 970 720 78 74 0.71 0.7 7.82 5.01 29.54 24.37 1.6 1.4 6 5.5 2.3 2
MSD160M1-6/8 3.7 2.6 970 720 78 75 0.74 0.71 9.25 7.05 36.43 34.49 1.8 1.5 6 5.5 2.5 1.9
MSD160M2-6/8 4.5 3.3 970 720 79 76 0.78 0.72 10.54 8.70 44.30 43.77 1.8 1.7 6 5.5 2.5 2
MSD160L-4/6 6 4.5 973 720 80 77 0.79 0.73 13.70 11.55 59.89 59.69 1.8 1.7 6 5.5 2.5 2

 

Model Power
kW 		Speed
RPM 		Efficiency
7%		 Power Factor
COS Φ 		Current
A 		Rated Torque
Nm 		Tst/Tn
Times 		lst/ln
Times 		Tmax/Tn
Times
2P 8P 2P 8P 2P 8P 2P 8P 2P 8P 2P 8P 2P 8P 2P 8P 2P 8P
MSD801-2/8 0.37 0.08 2760 660 65 33 0.76 0.48 1.08 0.73 1.28 1.16 1.7 2 3.5 2.5 1.9 2.1
MSD802-2/8 0.55 0.11 2780 670 67 35 0.78 0.50 1.52 0.91 1.89 1.57 1.7 2 4 3 1.9 2.2
MSD90S-2/8 0.75 0.18 2800 670 67 43 0.79 0.52 2.05 1.16 2.56 2.57 1.8 2 4 3 2 2.3
MSD90L-2/8 1.1 0.3 2810 680 67 45 0.8 0.54 2.96 1.78 3.74 4.21 1.8 2 4 3.5 2 2.3
MSD100L1-2/8 1.5 0.37 2820 700 67 50 0.84 0.56 3.85 1.91 5.08 5.05 1.7 2.1 5 3.5 2 2.6
MSD100L2-2/8 2.2 0.55 2820 710 68 51 0.85 0.58 5.49 2.68 7.45 7.40 1.8 2.2 5 3.5 2 2.6
MSD112M1-2/8 2.6 0.75 2840 710 71 58 0.86 0.6 6.15 3.11 8.74 10.09 1.8 1.8 5.5 4 1.9 1.9
MSD112M2-2/8 3 0.9 2850 710 75 63 0.86 0.58 6.71 3.56 10.05 12.1 1.7 2 6.5 4.5 1.9 2.2
MSD132S-2/8 3.7 1.1 2890 710 81 65 0.83 0.57 7.94 4.29 12.22 14.80 1.7 1.7 7 5 1.9 1.9
MSD132M-2/8 5.5 1.5 2900 720 82 66 0.85 0.57 11.39 5.75 18.11 19.90 1.8 1.8 7 5 1.9 1.9
MSD160M-2/8 7.5 2.2 2900 720 80 73 0.87 0.58 15.55 7.50 24.70 29.18 2.3 2.5 7 5 2.3 2.5
MSD160L-2/8 9.5 3 2920 720 82 73 0.87 0.58 19.22 10.23 31.07 39.79 2.3 2.5 7 5 2.3 2.5

 

Model Power
kW 		Speed
RPM 		Efficiency
7%		 Power Factor
COS Φ 		Current
A 		Rated Torque
Nm 		Tst/Tn
Times 		lst/ln
Times 		Tmax/Tn
Times
2P 4P 2P 4P 2P 4P 2P 4P 2P 4P 2P 4P 2P 4P 2P 4P 2P 4P
MSD712-2/4 0.55 0.12 2850 1410 75 57 0.78 0.55 1.5 0.7 1.8 0.8 2.7 3.3 6 4 2.7 3.2
MSD801-2/4 0.75 0.19 2860 1430 75 59 0.82 0.6 2 1 2.4 1.2 3.3 2.8 7 4 2.6 2.8
MSD802-2/4 1.1 0.28 2870 1430 79 64 0.82 0.59 2.8 1.5 3.6 1.8 3.4 2.5 7.5 4.6 2.8 2.8
MSD90S-2/4 1.5 0.38 2880 1440 82 71 0.84 0.6 3.5 1.5 4.9 2.5 2.6 3.2 7.5 5.5 3.3 3.5
MSD90L-2/4 2.2 0.55 2880 1440 83 73 0.86 0.62 4.5 2 7.2 3.5 3.6 3.6 8 5.8 3.3 3.2
MSD100L1-2/4 3 0.8 2850 1430 81 77 0.9 0.72 6 2.2 10 5.2 2.1 1.9 8 5.5 2.8 2.5
MSD112M-2/4 4 1 2910 1450 85 80 0.86 0.67 8 3 13 6 3.2 3.2 10.5 8 3.4 3.7
MSD112M-2/4 4.5 1.3 2900 1440 84 81 0.93 0.81 8.5 3 14 8 2.3 1.9 9.5 6.5 2.9 2.6
MSD132S-2/4 5.5 1.4 2900 1450 85 82 0.9 0.73 10.5 3.5 18 9 2.7 2.1 9.5 6.5 3 3
MSD132S-2/4 6 1.6 2890 1440 83 80 0.92 0.79 11.5 3.9 19 10 2.5 1.8 9 6 2.9 2.7
MSD132M-2/4 9 2.5 2920 1450 86 82 0.91 0.79 17 6 29 16 2.5 1.8 10.3 6.8 2.5 2.7
MSD160M-2/4 15 3.7 3930 1460 86 86 0.91 0.76 28 8.5 48 24 2.5 2.3 8 6.4 2.9 2.6
MSD160L-2/4 18.5 4.4 2940 1470 88 87 0.91 0.74 34 10.5 59 58 3 2.7 9.5 7 3.2 3

 

Model Power
kW 		Speed
RPM 		Efficiency
7%		 Power Factor
COS Φ 		Current
A 		Rated Torque
Nm 		Tst/Tn
Times 		lst/ln
Times 		Tmax/Tn
Times
4P 8P 4P 8P 4P 8P 4P 8P 4P 8P 4P 8P 4P 8P 4P 8P 4P 8P
MSD711-4/8 0.25 0.03 1370 710 53 30 0.67 0.44 1.2 0.5 1.7 0.4 2.4 2.5 3.5 2.8 2.5 4.8
MSD712-4/8 0.33 0.04 1360 710 58 34 0.71 0.45 1.5 0.5 2.3 0.5 2.2 4.1 4 3 2.5 4.6
MSD712-4/8 0.37 0.09 1360 650 58 45 0.69 0.61 1.5 0.5 2.5 1.3 2.4 2 3.5 2.5 2.5 2
MSD801-4/8 0.55 0.09 1410 710 64 43 0.7 0.49 2 1 3.7 1.1 2 2.6 4.5 3.5 2.5 3.6
MSD802-4/8 0.75 0.19 1430 710 76 59 0.82 0.6 1.8 0.8 2.4 1.2 3.3 2.8 7 4 2.6 2.8
MSD90S-4/8 1.1 0.18 1400 710 75 53 0.79 0.47 3 1.5 7.4 2.4 2.3 3 5.8 3.6 2.5 3.5
MSD90L-4/8 1.5 0.25 1380 700 75 57 0.83 0.49 4 1.5 10 3 2.2 2.8 5.8 3.6 2.4 3.3
MSD100L1-4/8 2.2 0.37 1430 720 79 62 0.8 0.46 4 2 14 4.5 2.1 2.5 7 4.5 2.7 3.5
MSD100L2-4/8 3 0.55 1420 710 80 67 0.82 0.5 6.6 2.5 20 7.3 2 2.3 6.9 4 2.5 3
MSD112M-4/8 4 0.75 1440 720 82 72 0.84 0.53 8.5 3 26.5 9.9 1.9 1.9 7.5 4.5 2.5 2.8
MSD132S-4/8 5.5 1.1 1450 720 84 74 0.85 0.54 11 4 36 14 2.1 1.5 8.5 5 2.5 2.8
MSD132M-4/8 7.5 1.5 1450 720 85 75 0.83 0.51 15 5.8 49 19 2.2 2 9.2 5 3 3
MSD160M-4/8 8.9 2 1460 730 87 79 0.83 0.53 18 7 58 26 2.4 1.7 8.7 4.5 3 2.6
MSD160L-4/8 11 2.8 1460 720 88 81 0.83 0.58 22 8.5 71 36 2.3 1.4 8 4 2.7 1.8
MSD160L-4/8 15 3.5 1460 720 89 82 0.83 0.56 12.5 11.5 97 45 2.2 1.6 7.5 4 2.9 2
MSD180M-4/8 18.5 4.6 1470 730 90 84 0.84 0.55 35 14 119 59 2.5 2.3 9 5.5 3 2.8
MSD180L-4/8 22 5.5 1470 730 90 83 0.85 0.6 40 16 142 71 2.4 2.1 9.5 5.5 3 2.8

 

Model Power
kW 		Speed
RPM 		Efficiency
7%		 Power Factor
COS Φ 		Current
A 		Rated Torque
Nm 		Tst/Tn
Times 		lst/ln
Times 		Tmax/Tn
Times
4P 6P 4P 6P 4P 6P 4P 6P 4P 6P 4P 6P 4P 6P 4P 6P 4P 6P
MSD71S-4/6 0.25 0.09 1380 950 48 41 0.68 0.64 1.3 0.5 1.7 0.9 2.4 2 3 2.5 2.2 2.1
MSD801-4/6 0.37 0.12 1420 960 59 47 0.68 0.58 1.5 0.7 2.4 1.1 2 2.2 4.5 4 2.3 2.9
MSD802-4/6 0.55 0.16 1420 960 64 53 0.72 0.56 1.8 0.8 3.6 1.5 1.7 2.4 4.5 4.2 2.2 3.2
MSD90S-4/6 0.75 0.25 1410 950 65 59 0.74 0.65 2.5 0.9 5 2.4 1.8 1.6 4.5 4.2 2.1 2.3
MSD90L1-4/6 1.1 0.37 1410 950 68 64 0.74 0.68 3.2 1.5 7.4 3.7 1.9 2 4.5 4.2 2.1 2.2
MSD90L2-4/6 1.5 0.5 1420 950 73 68 0.77 0.7 4 1.6 10 4.8 1.9 1.9 5.5 5 2.1 2.3
MSD100L1-4/6 1.7 0.6 1430 960 75 68 0.77 0.73 4.5 2 11 5.5 1.9 1.6 5.5 5 2.2 2.1
MSD100L2-4/6 2.2 0.75 1430 950 80 69 0.83 0.69 5 2.4 14.5 7.5 2.4 1.7 6.5 4.3 2.5 2.2
MSD100L2-4/6 3 0.9 1430 950 77 68 0.77 0.7 7.5 3 19 8 2.7 1.7 6 4.3 2.5 2.2
MSD112M-4/6 3 1 1440 950 82 72 0.84 0.72 6.5 3 19.5 9.5 2.2 1.3 7.5 4.5 2.5 2.1
MSD132S-4/6 4 1.3 1440 960 80 73 0.81 0.73 9 4 26 12.5 2.3 1.3 3.8 5.5 2.4 2.1
MSD132M1-4/6 5.5 1.6 1450 970 83 75 0.81 0.71 12 4.5 36 15 2.4 1.4 7.8 6 2.4 2.2
MSD132M1-4/6 6 2 1450 970 84 77 0.8 0.74 13 5.5 39 19 2.5 1.5 7.8 6 2.8 2.2
MSD132M1-4/6 7.5 2.2 1450 970 85 72 0.86 0.74 15 6.2 49 21 2.2 1.4 8 5.5 2.7 2.2
MSD160M-4/6 11 3.3 1460 970 86 77 0.85 0.75 22 8.5 71 32 2.5 1.3 8 4.8 3 1.9
MSD160L-4/6 15 5 1450 970 88 80 0.86 0.73 29 12.5 98 48 2.2 1.9 9 6 2.3 2.3

 

Model Power
kW 		Speed
RPM 		Efficiency
7%		 Power Factor
COS Φ 		Current
A 		Rated Torque
Nm 		Tst/Tn
Times 		lst/ln
Times 		Tmax/Tn
Times
6P 8P 6P 8P 6P 8P 6P 8P 6P 8P 6P 8P 6P 8P 6P 8P 6P 8P
MSD802-6/8 0.37 0.18 940 710 64 53 0.67 0.57 1.3 0.9 3.7 2.4 2.3 2.4 4.5 3.5 2.5 2.7
MSD90S-6/8 0.75 0.32 940 710 70 57 0.73 0.61 2.1 1.4 7.5 4.2 1.9 1.6 4.6 3.3 2.5 2.2
MSD90L1-6/8 1.1 0.46 940 710 67 52 0.67 0.63 4 2.4 11 6 1.8 1.6 4 3.5 2.2 1.9
MSD100L-6/8 1.5 0.63 950 710 75 62 0.72 0.66 4.3 2.5 14.5 8 2.1 1.7 5.2 4 2.3 2
MSD112M-6/8 2.2 0.93 950 720 79 68 0.75 0.62 5.5 3.5 21 12 2.6 1.7 6 4.2 2.5 2.3
MSD132S-6/8 3 1.3 970 730 83 72 0.76 0.6 7 4.5 29 16 2.4 1.8 7 4.6 2.6 2.4
MSD132M-6/8 4 1.7 970 730 83 74 0.77 0.6 9.3 5.8 39 22 2.4 1.9 7 5 2.5 2.5

 

Model Power
kW 		Speed
RPM 		Efficiency
7%		 Power Factor
COS Φ 		Current
A 		Rated Torque
Nm 		Tst/Tn
Times 		lst/ln
Times 		Tmax/Tn
Times
6P 12P 6P 12P 6P 12P 6P 12P 6P 12P 6P 12P 6P 12P 6P 12P 6P 12P
MSD802-6/12 0.37 0.06 930 450 59 30 0.71 0.57 1.3 0.5 3.7 1.2 1.6 1.9 3.5 2 1.9 2
MSD802-6/12 0.55 0.08 930 450 64 38 0.74 0.57 1.7 0.53 5.6 1.7 1.6 1.8 4 2 2 2
MSD90S-6/12 0.75 0.1 930 460 66 41 0.75 0.47 2.2 0.8 7 2 1.4 1.8 3.6 2 1.9 2.2
MSD90L-6/12 1.1 0.15 930 460 67 42 0.73 0.46 3.2 1.2 11 3 1.7 2.1 3.8 2 2 2.3
MSD100L-6/12 1.5 0.2 940 470 73 48 0.75 0.44 4 1.5 15 4 2.1 3.2 4.8 1.5 2.4 3.1
MSD112M-6/12 2.2 0.3 950 470 77 54 0.74 0.41 5.5 2 22 6 2.2 3 5.3 2.7 2.5 3.2
MSD132S-6/12 3 0.4 960 480 77 51 0.7 0.39 8 2.9 29 7 2.6 3.4 6 3.5 3 3.9
MSD132M1-6/12 4 0.55 970 480 80 57 0.72 0.39 10 3.6 39 10 2.7 3.4 6.5 3.6 3.2 4.2
MSD132M2-6/12 5.5 0.75 970 480 81 59 0.73 0.39 13.5 4.7 54 14 2.9 3.5 7 3.5 2.7 3.9
MSD112M-4/6 3 1 1440 950 82 72 0.84 0.72 6.5 3 19.5 9.5 2.2 1.3 7.5 4.5 2.5 2.1
MSD132S-4/6 4 1.3 1440 960 80 73 0.81 0.73 9 4 26 12.5 2.3 1.3 3.8 5.5 2.4 2.1
MSD132M1-4/6 5.5 1.6 1450 970 83 75 0.81 0.71 12 4.5 36 15 2.4 1.4 7.8 6 2.4 2.2
MSD132M1-4/6 6 2 1450 970 84 77 0.8 0.74 13 5.5 39 19 2.5 1.5 7.8 6 2.8 2.2
MSD132M1-4/6 7.5 2.2 1450 970 85 72 0.86 0.74 15 6.2 49 21 2.2 1.4 8 5.5 2.7 2.2

previous:

ItalyMS Series Three-Phase Aluminum-Cased Induction Motor

Italynone

: next

Quick navigation

Product Center

About Us

Honor

Blog

Download

City Product

Contact Us

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Address: Tiehu Industrial Zone, Fuan City, Ningde City, Fujian Province

Tel: 86-593-6370866

Email: sales2@starmotor.cn

Message
language
QR code

Copyright © 2025 STAR MOTORS Co., Ltd

www.300.cn